Most common
problems & fixes

Is your AEG ÖKO_FAVORIT 4070 letting you down? Don't worry, we're here to help. Check out our list of the most common problems and how to fix them yourself.

The programme does not start

The door of the dishwasher is not closed properly or the mains plug is not plugged in

Shut the door and insert mains plug

Dishes are still dirty after wash

The wrong wash programme was selected, dishes were loaded incorrectly, or detergent was insufficient

Select the correct wash programme, ensure proper loading, and use adequate detergent

No water is running into the dishwasher

Tap is blocked or furred with lime-scale

Clean the tap and contact customer service if issue persists

The siphon is blocked

Water drain hose is not correctly laid

Clean siphon and check hose installation

Quick setup

Follow these easy steps to get your AEG ÖKO_FAVORIT 4070 Dishwasher up and running in no time.

1

Check for Transport Damage

Before you begin the setup process, inspect the dishwasher for any transport damage. Do not connect a damaged appliance and contact your vendor if damage is found.

2

Position the Dishwasher

Ensure the dishwasher is placed on a firm floor and adjusted to be stable and level. Use a screwdriver to adjust the threaded feet to compensate for any floor unevenness.

3

Install the Dishwasher

For built-in models, if the dishwasher is set up next to a cooker, mount a heat-insulating, non-flammable plate between the dishwasher and the cooker. Ensure the plate is flush with the top edge of the work surface.

Eco-Friendly Vibes

The AEG ÖKO_FAVORIT 4070 waves its eco-friendly flag high! Printed on paper manufactured with the environment in mind, this dishwasher is all about being green. 🌿

Whispering Wash

Shh... listen closely! The noise levels of the ÖKO_FAVORIT 4070 change during the wash program, making it a master of stealth washing. 🤫

Troubleshooting

The AEG ÖKO_FAVORIT 4070 Dishwasher has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your AEG might be giving you.

END indicator flashing

No water is running into the dishwasher. This issue may be caused by the tap being blocked or furred with lime-scale. Ensure the tap is fully open and check if it is blocked or furred with lime-scale. Clean the tap if necessary. If the issue persists, contact customer service.

DRYING indicator flashing

The siphon is blocked or the water drain hose is not correctly laid. Clean the siphon to remove any blockages. Additionally, check the installation of the water drain hose to ensure it is laid correctly. If the issue persists, contact customer service.

END and DRYING indicators flashing simultaneously

The leak prevention system has been triggered, indicating a potential leak or overflow within the appliance. Inspect the dishwasher for any visible leaks or overflows. If none are found, reset the appliance by turning it off and on. If the problem continues, contact customer service for further assistance.

Safety Instructions

The AEG ÖKO_FAVORIT 4070 Dishwasher complies with accepted technical standards and the German Appliance Safety Law. It should be transported upright, installed on a firm and level floor, and adjusted using its threaded feet to compensate for any floor unevenness. Never sit or stand on the open door as it may tip over. In case of faults, shut off the water supply and unplug the appliance.

Economical and Ecological Dishwashing

Connect the dishwasher to a hot water supply only if it's not electrically heated. Ensure the water softener is correctly adjusted. Use the recommended amount of detergent, special salt, and rinse aid. Select wash programmes based on the nature and degree of soiling on the dishes.

Wash Programmes

Choose the appropriate wash programme using the programme table. For heavily soiled dishes, use additional detergent in the pre-wash chamber. Bio wash programmes use concentrated detergents and operate efficiently at lower temperatures due to the enzymes in the detergent.

Energy and Water Usage

The dishwasher is designed to be energy and water-efficient. For half loads, it saves up to 2 litres of water and 0.2 kWh of electricity. Energy consumption varies by the programme, ranging from 0.85 kWh to 1.55 kWh, with water usage between 4 to 20 litres.

Control Panel and Features

The control panel includes an ON/OFF switch, programme buttons with LED indicators, and options to adjust the water softener. Key features include spray arms, containers for special salt and rinse aid, a detergent dispenser, filters, and a top spray nozzle.

Daily Use Instructions

Before loading dishes, remove large food remnants. Load cutlery and dishes ensuring that spray arms can rotate freely. Fill with detergent and select a suitable wash programme. Start the programme by pressing the ON/OFF button and the desired programme button. After washing, allow dishes to cool before removing them to prevent damage.

Troubleshooting and Maintenance

If the wash results are unsatisfactory, ensure the correct programme is selected, the dishes are properly loaded, and the filter is clean. In case of scale deposits, check the special salt container and water softener settings. For persistent issues, refer to the 'What to do, if...' section and contact customer service if needed.

Maintenance

Check out our tips to prevent many common issues and extend the life of your AEG Dishwasher.

Regular Cleaning

Ensure regular cleaning of the dishwasher's filter, spray arms, and door seals to prevent blockages and ensure optimal performance.

Proper Loading

Load dishes correctly to ensure that water can reach all surfaces. Avoid overloading which can prevent effective cleaning.

Use of Detergent

Use the recommended amount of detergent. Excessive detergent can cause residue build-up, while too little can lead to ineffective cleaning.

Water Softener Adjustment

Ensure that the water softener is correctly adjusted to your local water hardness. Incorrect settings can lead to scale deposits on dishes.

Special Salt and Rinse Aid

Check and refill the special salt and rinse aid regularly. These are essential for preventing limescale and ensuring dishes dry without spots.

)

tech specs

Need more info? Please have a look at the tech specs of the watch. We’ve used Latest technology & quality materials

General Specifications

Capacity and Performance

Features

Programs and Functions

Installation

AEG ÖKO_FAVORIT 4070: A Blend of Efficiency and Innovation

The AEG ÖKO_FAVORIT 4070 dishwasher is a stellar example of modern appliance engineering, combining eco-friendly technology with high-performance cleaning. Designed with a sleek, contemporary look, this dishwasher complements any kitchen decor while delivering exceptional functionality. It boasts the innovative 'PULSE WASH' system, which dynamically adjusts the motor speed and spray pressure to ensure optimal cleaning results, even for heavily soiled items. The ÖKO_FAVORIT 4070 is engineered to accommodate up to 12 place settings, making it ideal for both small and large households. Its energy-efficient design not only reduces water and electricity consumption but also supports the use of concentrated detergents that work effectively at lower temperatures. By incorporating features such as load sensing and water softening, this dishwasher ensures your dishes emerge spotless every time, all while maintaining a quiet operation that won't disrupt the tranquility of your home.